INTRINSICALLY SAFE LED CORDLESS CAPLAMP

Quantity: Min/Max Order: 1 / 9999 The selected item is out of stock, please select a different item or combination

E-mail to a friend Add To Wish List

KC3D-Ex IS A CORDLESS LED caplamp that has an Australian tested Zone 0 approval Suitable for coal, refinery and Oil & gas environments . It has two LED light sources. The Main LED, a high-power LED located in the middle of the reflector, is for both normal and high-beam illumination. The Emergency LED, a low power LED located on the brim of the reflector, can operate for an extended period during an emergency.
KC3D-Ex features a superior illumination in just 140g, even less than the headpiece of a traditional caplamp. It is suitable for most underground mining applications.

There are three operating modes. Main mode (level 2): For normal working operation, delivering good illumination in excess of 14 hours duration. High-beam mode (level 3): Strong light beam for long distance projection, spotting, etc. Should only be used for short periods because the heavier battery drain shortens light duration in this Mode to around 8 hours. Auxiliary mode (level 1): Power saving for long operation and low level illumination. Off: The Caplamp is switched off. – Always starts up from the Main Mode when switched on. – By toggling the operating button the Caplamp goes through Main Mode > High-Beam Mode > Auxiliary Mode > Off Mode – Holding the button down for 2 seconds switches the Caplamp off directly. – If the lamp is kept in the High-beam Mode for 20 minutes, it will automatically goes to the Main Mode.